Windows 11 IoT Enterprise 25H2 and FIX

-

 Windows 11 IoT Enterprise 25H2

(Not LTSC)
Build - 26200.6584 (Sep 2025)
These ISOs contain below editions,

Windows 11 Enterprise
Windows 11 IoT Enterprise
Windows 11 IoT Enterprise Subscription

IoT Enterprise ISO is available only in English language.

LanguageArchLink
Englishx64en-us_windows_11_iot_enterprise_version_25h2_x64_dvd_67098cd6.iso
info

Note for IoT Enterprise (GAC) - Not LTSC

When installing Windows IoT Enterprise (GAC):

  • If your system has an OEM license in the motherboard (Pro or higher),
  • And the key used in Setup is OEM,

then Windows Setup will apply the OEM key from the motherboard during the final stage.

What this means

  • You can install IoT Enterprise with its features (including relaxed hardware requirements on Windows 11 24H2, etc.).
  • After installation, the system will show Pro edition, not IoT Enterprise.
  • This happens because IoT Enterprise (GAC) is distributed only with an OEM key.
  • This behavior is normal and cannot be avoided.

Fix
After installation, switch the edition by running the following in command prompt as admin.

slmgr.vbs /ipk XQQYW-NFFMW-XJPBH-K8732-CKFFD

Comments

Post a Comment

Popular posts from this blog

Clearing DNS cache on vCenter Server Appliance

-
  Clearing DNS cache on vCenter Server Appliance 6.5/6.7 - Just Virtualise It (kanecharles.com) I came across a situation recently where I was building some nested ESXi hosts and had configured the incorrect IP address for their DNS record, only to realize this after attempting to add the host into Center:  By attempting to add the host, vCenter will query your DNS servers for the IP address associated with the FQDN you have supplied (assuming you did this method, not via IP address). If you have set the wrong IP on your DNS server for the above FQDN record, you have 2 options: Wait a short while for vCenter to clear the cache entry for this FQDN, thus allowing you to add the host with the correct IP from the DNS record Clear the DNS cache on your vCenter Server Appliance (vCSA) vCSA 6.5 upwards runs on Photon OS with dnsmasq acting as a local caching nameserver (thank you to Brandon for the comment to clarify). Enough rambling, so how do we do it? If you’re anything like...
Read more

How to step by step in detail install ssh on cachyos

-
 how to step by step in detail install ssh on cachyos To install and enable SSH on CachyOS, follow these detailed steps: 1. Install OpenSSH: Open a terminal window. Use the pacman package manager to install the OpenSSH package: bash sudo pacman -S openssh Use code with caution. This command will download and install the necessary SSH server components.   2. Enable and Start the SSH Daemon (sshd): Start the sshd service (the SSH daemon): bash sudo systemctl start sshd Use code with caution. This command will launch the SSH server, making it available to accept incoming connections. Enable the sshd service to start automatically on boot: bash sudo systemctl enable sshd Use code with caution. This ensures that SSH will be available after each system restart.   3. (Optional) Configure the SSH Server: The SSH server's behavior is configured through the /etc/ssh/sshd_config file. Important : It's highly recommended to create a backup of the original configuration file befor...
Read more